Wednesday, November 25, 2009
CD-RW (Compact Disc Re-Writable)
Stands for "Compact Disc Re-Writable." A CD-RW is a blank CD that can be written to by a CD burner. Unlike a CD-R (CD-Recordable), a CD-RW can be written to multiple times. The data burned on a CD-RW cannot be changed, but it can be erased. Therefore, you have to completely erase a CD-RW every time you want to change the files or add new data. While it may be somewhat inconvenient, this capability makes CD-RWs a good choice for making frequent backups. However, because CD-RWs can be erased, they don't store data reliably for as long as CD-Rs do. Therefore, you should use regular CD-Rs for long-term backups.
CD-R (Compact Disc Recordable)
Stands for "Compact Disc Recordable." CD-R discs are blank CDs that can record data written by a CD burner. The word "recordable" is used because CD-Rs are often used to record audio, which can be played back by most CD players. However, many other kinds of data can also be written to a CD-R, so the discs are also referred to as "writable CDs."
The data burned onto a CD-R disc is permanent, meaning it can not be altered or erased like the data on a hard drive. Typically, once a CD has been burned, it will not be able to record any more data. Some CD burning programs can record data as "sessions," allowing a disc to be written to mulitple times until it is full. Each session creates a new partition on the disc, meaning a computer will read a disc with multiple sessions as multiple discs. CD-RWs, on the other hand, can be erased and completely re-recorded. Like CDs, the data on CD-RWs cannot be altered, meaning the disc has to be completely erased each time you want to add new data.
The data burned onto a CD-R disc is permanent, meaning it can not be altered or erased like the data on a hard drive. Typically, once a CD has been burned, it will not be able to record any more data. Some CD burning programs can record data as "sessions," allowing a disc to be written to mulitple times until it is full. Each session creates a new partition on the disc, meaning a computer will read a disc with multiple sessions as multiple discs. CD-RWs, on the other hand, can be erased and completely re-recorded. Like CDs, the data on CD-RWs cannot be altered, meaning the disc has to be completely erased each time you want to add new data.
CD (Compact Disc)
Stands for "Compact Disc." CDs are circular discs that are 4.75 in (12 cm) in diameter. The CD standard was proposed by Sony and Philips in 1980 and the technology was introduced to the U.S. market in 1983. CDs can hold up to 700 MB of data or 80 minutes of audio. The data on a CD is stored as small notches on the disc and is read by a laser from an optical drive. The drives translate the notches (which represent 1's and 0's) into usable data.
The first CDs were audio CDs, which eventually replaced audio tapes (which earlier replaced records). Audio CDs have the advantage of allowing the user to jump to different places on the disc. CDs can also be listened to an unlimited number of times without losing quality. Audio tapes can start to lose quality after listening to them as few as ten times. This is because the laser that reads the data on a CD doesn't put pressure on the disc, whereas the playheads on a tape deck slowly wear away the magnetic strip on the tape.
In 1985, CD-ROMs hit the computer market. Because they could store far more information than floppy discs (700 MB compared to 1.4 MB), CDs soon became the most common software format. In 1988, the CD-R (CD-Recordable) technology was introduced, allowing computer users to burn their own CDs. However, this technology did not become mainstream until the late 1990s. A smaller 3" CD, called "CD-3" is also available and is readable by most tray-loading CD-ROM drives.
DVD+RW (Digital Versatile Disk Rewritable)
Stands for "Digital Versatile Disk Rewritable." A DVD+RW is like a DVD+R, but can be erased and rewritten. DVD+RWs must be completely erased in order for new data to be added. DVD+RW discs can hold 4.7GB of data and do not come in double-sided or double-layer versions like DVD+Rs do. Still, 4.7GB of data is a lot of storage space. Combined with their ability to be re-recorded, DVD+RWs are a great choice for making frequent backups of your data. To record data onto a DVD+RW disc, you'll need a DVD burner that supports the DVD+RW format.
DVD+R (Digital Versatile Disc Recordable)
Stands for "Digital Versatile Disc Recordable." DVD+R discs look the same as regular DVDs, but can be used to record data. Single-sided, single-layer DVD+R discs can store 4.7GB of data, while double-layer discs can store 8.5GB and double-sided DVD-Rs can store 9.4GB. The DVD+R format is not quite as common as the DVD-R format, but is still supported by most current DVD players and DVD-ROM drives. Drives that can read both DVD+R and DVD-R discs are often referred to as DVD?R drives.
DVD (Digital Versatile Disc)
Stands for "Digital Versatile Disc." It can also stand for "Digital Video Disc," but with the mulitple uses of DVDs, the term "Digital Versatile Disc" is more correct. Yep, the technology naming people just love to confuse us. A DVD is a high-capacity optical disc that looks like a CD, but can store much more information. While a CD can store 650 to 700 MB of data, a single-layer, single-sided DVD can store 4.7 GB of data. This enables massive computer applications and full-length movies to be stored on a single DVD.
The advanced DVD formats are even more amazing. There is a two-layer standard that doubles the single-sided capacity to 8.5 GB. These disks can also be double-sided, ramping up the maximum storage on a single disc to 17 GB. That's 26 times more data than a CD can hold! To be able to read DVDs in your computer you'll need a DVD-ROM drive. Fortunately, DVD players can also read CDs. To play DVD movies on your computer, you'll need to have a graphics card with a DVD-decoder, which most computers now have.
Subscribe to:
Posts (Atom)